# Configure

The Configure section of the Pomerium Enterprise Console houses settings that affect the entirety of the Console environment, i.e. across all Namespaces. Adjust these settings with care.

# Settings

The Settings section holds global settings that affect how the Pomerium Enterprise Console runs, logs, and communicates. Values set here are applied globally, except for settings documented to override global options.

# Global

# Debug

WARNING

Enabling the debug flag could result in sensitive information being logged!!!

By default, JSON encoded logs are produced. Debug enables colored, human-readable logs to be streamed to standard out (opens new window). In production, it is recommended to be set to false.

For example, if true

10:37AM INF cmd/pomerium version=v0.0.1-dirty+ede4124
10:37AM INF proxy: new route from=verify.localhost.pomerium.io to=https://verify.pomerium.com
10:37AM INF proxy: new route from=ssl.localhost.pomerium.io to=http://neverssl.com
10:37AM INF proxy/authenticator: grpc connection OverrideCertificateName= addr=auth.localhost.pomerium.io:443

If false

{"level":"info","version":"v0.0.1-dirty+ede4124","time":"2019-02-18T10:41:03-08:00","message":"cmd/pomerium"}
{"level":"info","from":"verify.localhost.pomerium.io","to":"https://verify.pomerium.com","time":"2019-02-18T10:41:03-08:00","message":"proxy: new route"}
{"level":"info","from":"ssl.localhost.pomerium.io","to":"http://neverssl.com","time":"2019-02-18T10:41:03-08:00","message":"proxy: new route"}
{"level":"info","OverrideCertificateName":"","addr":"auth.localhost.pomerium.io:443","time":"2019-02-18T10:41:03-08:00","message":"proxy/authenticator: grpc connection"}

# HTTP Redirect Address

If set, the HTTP Redirect Address specifies the host and port to redirect http to https traffic on. If unset, no redirect server is started.

# DNS Lookup Family

The DNS IP address resolution policy. If not specified, the value defaults to AUTO.

# Log Level

Log level sets the global logging level for pomerium. Only logs of the desired level and above will be logged.

# Proxy Log Level

Proxy log level sets the logging level for the Pomerium Proxy service access logs. Only logs of the desired level and above will be logged.

# Cookies

# HTTPS Only

If true, instructs browsers to only send user session cookies over HTTPS.

WARNING

Setting this to false may result in session cookies being sent in cleartext.

# Javascript Security

If true, prevents javascript in browsers from reading user session cookies.

WARNING

Setting this to false enables hostile javascript to steal session cookies and impersonate users.

# Expires

Sets the lifetime of session cookies. After this interval, users must reauthenticate.

# Timeouts

Timeouts set the global server timeouts. Timeouts can also be set for individual routes.

# GRPC

# GRPC Server Max Connection Age

Set max connection age for GRPC servers. After this interval, servers ask clients to reconnect and perform any rediscovery for new/updated endpoints from DNS.

See https://godoc.org/google.golang.org/grpc/keepalive#ServerParameters (opens new window) (opens new window) for details

# GRPC Server Max Connection Age Grace

Additive period with grpc_server_max_connection_age, after which servers will force connections to close.

See https://godoc.org/google.golang.org/grpc/keepalive#ServerParameters (opens new window) (opens new window) for details

# Tracing

Tracing tracks the progression of a single user request as it is handled by Pomerium.

Each unit of work is called a Span in a trace. Spans include metadata about the work, including the time spent in the step (latency), status, time events, attributes, links. You can use tracing to debug errors and latency issues in your applications, including in downstream connections.

# Tracing Sample Rate

Percentage of requests to sample. Default is .01%.

Unlike the decimal value notion used for the tracing_sample_rate key in open-source Pomerium, this value is a percentage, e.g. a value of 1 equates to 1%

# Authenticate

# Proxy

# Certificate Authority

This defines a set of root certificate authorities that Pomerium uses when communicating with other TLS-protected services.

Note: Unlike route-specific certificate authority settings, this setting augments (rather than replaces) the system's trust store. But routes that specify a CA will ignore those provided here.

WARNING

Be sure to include the intermediary certificate.

# Default Upstream Timeout

Default Upstream Timeout is the default timeout applied to a proxied route when no timeout key is specified by the policy.

# JWT Claim Headers

The JWT Claim Headers setting allows you to pass specific user session data to upstream applications as HTTP request headers. Note, unlike the header x-pomerium-jwt-assertion these values are not signed by the authorization service.

Additionally, this will add the claim to the X-Pomerium-Jwt-Assertion header provided by pass_identity_headers, if not already present.

Any claim in the pomerium session JWT can be placed into a corresponding header and the JWT payload for upstream consumption. This claim information is sourced from your Identity Provider (IdP) and Pomerium's own session metadata. The header will have the following format:

X-Pomerium-Claim-{Name} where {Name} is the name of the claim requested. Underscores will be replaced with dashes; e.g. X-Pomerium-Claim-Given-Name.

This option also supports a nested object to customize the header name. For example:

jwt_claims_headers:
  X-Email: email

Will add an X-Email header with a value of the email claim.

Use this option if you previously relied on x-pomerium-authenticated-user-{email|user-id|groups}.

# X-Forward-For HTTP Header

Do not append proxy IP address to x-forwarded-for HTTP header. See Envoy (opens new window) docs for more detail.

# Response Headers

Set Response Headers allows you to set static values for the given response headers. These headers will take precedence over the global set_response_headers.

# Service Accounts

Service accounts offer a protected and standardized method of authenticating machine-to-machine communication between services protected by Pomerium.

TIP

Before you begin, confirm you are in the correct Namespace. A service account can only be used in the Namespace it was created in, including its children Namespaces.

From the main menu, select Service Accounts under CONFIGURE. Click the + ADD SERVICE ACCOUNT button:
Service accounts can be unique and exist only for Pomerium, or impersonate directory users from your IdP.

Give the user a unique ID, or select an existing user to impersonate. Consider referencing the Namespace you're creating it under, for easier reference later. Optionally set an expiration date:

The user ID set here corresponds to the User criteria when editing a policy.
After you click Submit, the modal presents the JSON web token (JWT) for the service account. Temporarily save it somewhere secure, as you will not be able to view it again:

This JWT must be added to your application configuration to enable direct communication.
Edit or create policies to give the service account access to the internal service:

An example policy for a service account

# Namespaces

A Namespace is a collection of users, groups, routes, and policies that allows system administrators to organize, manage, and delegate permissions across their infrastructure.

Policies can be optional or enforced on a Namespace.
- Enforced policies are also enforced on child Namespaces, and optional policies are available to them as well.
Users or groups can be granted permission to edit access to routes within a Namespace, allowing them self-serve access to the routes critical to their work.

TIP

When using an IdP without directory sync or when working with non-domain users, they will not show up in the look-ahead search. See Non-Domain Users for more information.

← Manage API →